It is especially good for shooting on location due to the flash being Battery powered. Flash Duration: Between 1/220 second to 1/10,000 second for sharper images whilst maintaining colour accuracy throughout its power range. Fast Recycling times: a Super-quick Recycle Times of between 0.01 2.5 Seconds. Power Range: has an 9-stop power range (1/1 1/256 power) in 1/3rd stop power increments.
Modelling Bulb and Lamps: 10W LED modelling lamp which is equivalent to approximately100W tungsten but runs much cooler for longer usage time. The One System: can be used with any other Flash unit in the PIXAPRO range. Slave Cell: an intelligent slave cell (Pre-flash detector system) cell that can be set to ignore a Pre-Flash, which enables the use of the LUMI alongside speedlights or any other TTL strobe. Compatible Accessories: Compatible with a wide range of S-Type Accessories and Modifiers. Built in 2.4GHz flash receiver: allows it to be used in conjunction with the ST-III, ST-IV, ECO 2.4 or Pro AC 2.4GHz flash Triggers.
This allows you to control your flash heads remotely such as flash power settings, Modelling lamp on/off, changing groups & channels and Triggering. (making it also part of the ONE System). User-friendly interface: with large Dot-Matrix LCD screen, enables you to quickly and easily change your flash settings with the use of large, easy to access buttons and a control dial. PLEASE NOTE: The High-Speed Sync feature on the CITI600 Manual requires either an ST-III, ST-IV, ECO 2.4 Trigger to work and does not come supplied in this kit. 160cm (63) Parabolic Black/White Umbrella.Deep Parabolic Design: Focuses the light for greater efficiency, less spill, and more control over the direction of light. Enabling control of the focus of the light, by adjusting the position of your light source along the umbrellas shaft to achieve the look that you desire. Removable Diffusion Material: helps to produce a more even light, which produces super-soft, super diffused lighting, great for photographing small groups. High Quality Nylon: Making it durable and sturdy during transporting and storage. Matte-white coloured surface to minimise specular highlights and optimises reflection.
The black outer-surface prevents light from leaking through the umbrellas surface, and to absorb any unwanted light from being reflected onto your subject. 3 Tier Extension: making it collapsible to a height of 75cm and fully extend to 240cm. Air Cushioned Dampening System: this helps to prevent any sudden drops to minimise the risk of damage to your equipment or causing injury to yourself.
Thick Sturdy Central column: can be lowered down to be used as a fourth leg, offering extra stability. Interchangeable Spigot: Comes with the most popular universal 1/4 and 3/8 thread which makes it easy to use with other units up to 5kg. The PIXAPRO CITI600 Newborn Baby Flash Kit has been put together to give you super soft lighting into one simple easy to transport lighting kit.The kit comes with a large 160cm parabolic black/white umbrella with a removable diffuser which produces super soft lighting, ideal for New-born photography. The CITI600s Flash head has the ability to be used at 1/256 of its full power, allowing you to use super-wide apertures to achieve a super-soft look to your photos. A simple one light set-up with a large diffused modifier, it gives a lovely soft gentle light making it the perfect portable light set up for New-Born, weddings, family, Portraits, events, fashion, sports and advertising.
The Perfect kit for photographing Newborns. Integrated PIXAPRO 2.4GHz ONE system compatible receiver. Utilises IGBT technology for Super-Short Flash Durations, great for freezing motion.
High-Speed Sync mode up to 1/8000th. High Guide Number of GN87 (at ISO 100 with Standard Reflector).
Large Dot Matrix LCD Display. 500 Full Power Flashes (With PowerPack Dual Output). Super-quick Recycle Times of between 0.01 2.5 Seconds. 1/220 to 1/10,000 sec. 0.01 - 2.5 Seconds Recycle Time.1/1 - 1/256 (1/3 Stop Increments). Built in (removable) 11.1V / 8700mAh Lithium-ion Battery.
500 Full Powered Flashes Per Charge. 2.4GHz (Compatible with PIXAPRO PRO ST-III TTL Triggers). 100m with ST-III Transmitter in Open Area.5 (A, B, C, D, E). PC Sync Port, 3.5mm Sync port, USB port for Pro AC Trigger Set. 220mm x 245mm x 125mm. 160cm Black/White Umbrella with Diffuser.
For more information please do not hesitate to get in contact. The item "Newborn Baby Flash Kit Flash Lighting Studio Photo Backdrop setup CITI600 600W" is in sale since Monday, February 15, 2021. This item is in the category "Cameras & Photography\Lighting & Studio\Flash Lighting\Flash Lighting Kits". The seller is "tsl-2009" and is located in Brierley Hill.
This item can be shipped to all countries in Europe, Australia.